Serving Chennai · Ponneri · Gummidipoondi · Tiruvallur · Avadi & the AP–TN border belt +91 90039 03003 WhatsApp Mon–Sat, 9:30 AM – 6:30 PM
Tirupati District, Andhra Pradesh · from our crusher

6mm Jalli Price in Naidupeta

6mm Jalli costs about ₹462 a ton delivered in Naidupeta: ₹1,964 a unit (100 cft) or ₹20 a cft at 1.5 t/m³, with 5% GST. That is ₹230 ex-works plus ~₹210 transport for 50 km, and a full 18 MT load is about ₹8,316, royalty extra. Call or WhatsApp to book; the run takes about 1.5 hours.

₹462 / ton delivered, incl. 5% GST ~50 km from our crusher · 1.5 h by truck 1 load (~18 T) minimum order
WhatsApp
Small crushed grey stone chips of the 6 mm blue metal type, close-up — stock photo
6mm Chips · Naidupeta
Delivered price

6mm Jalli price by quantity in Naidupeta

Delivered price finder

6mm Jalli delivered to Naidupeta

Pick how you buy it (per ton, per unit of 100 cft, per cft or per load) and how much: the delivered price and its breakdown change at once. Every figure is also in the full table below.

Common orders:
  • Delivered = ex-works rate + transport for ~50 km + 5% GST; royalty at actuals.
  • 1 unit = 100 cft ≈ 4.25 t of Blue Metal 6mm at a loose 1.5 t/m³.

Blue Metal 6mm delivered to Naidupeta

1 × ton

Quantity≈ 1 t
Material (ex-works)₹230
Transport, ~50 km₹210
GST 5%₹22
Delivered price
₹462
per ton delivered, incl. 5% GST
WhatsApp

Royalty and levies extra, at actuals. 1 unit (100 cft) ≈ 4.25 t; a tipper load is 18 MT.

See all prices and quantitiesPer ton, per unit (100 cft), per cft and per load: delivered first, then ex-works and transport
6mm Jalli delivered to Naidupeta, by quantity
QuantityDelivered price (incl. 5% GST)Ex-worksof which transport (before GST)
1 ton (MT)₹462₹230~₹210
1 unit (100 cft ≈ 4.25 t)₹1,964₹978~₹893
1 cft (≈ 43 kg)₹20₹10~₹9
One 18 MT tipper load₹8,316₹4,140~₹3,780
Two loads (36 MT)₹16,632₹8,280~₹7,560

Unit and cft figures use our loose bulk density for Blue Metal 6mm: 1.5 t/m³, so 1 unit (100 cft, 2.83 m³) ≈ 4.25 t. Royalty and levies are itemised at actuals. Rates reviewed 2 October 2026.

Next question: how many loads do I need? Use the house quantity calculator, then price your exact quantity in the delivered-cost estimator.

6mm Jalli suppliers in Naidupeta

M&B Chetty India supplies 6mm jalli chips in Naidupeta from our Perindesam crusher and partner crushers in the belt. Our crusher at Perindesam (K.V.B. Puram mandal, Tirupati district) is about 50 km by road and 1.5 hours away for a loaded tipper. Every load is weighed on a weighbridge and travels with the GST invoice, weighbridge slip and AP e-transit pass.

Route: By road from the Perindesam works towards the NH-16 corridor at Naidupeta.

AP same-state supply — CGST + SGST at 5% (HSN 2517), no IGST. GST invoice, weighbridge slip and e-transit/transit papers accompany every tipper; AP royalty is itemised at actuals.

Who orders it in Naidupeta: Masonry and finishing teams (P-Sand, 6mm blue metal, M-Sand).

About Naidupeta

Naidupeta sits on the NH-16 highway near the Sri City belt and is close to our crusher at Perindesam — roughly 50 km by road — giving your site a short, same-state haul.

Building work in Naidupeta: Industrial and warehouse construction along the NH-16 belt; Residential and commercial buildings in and around the town; Highway-linked civil works, approach roads and drainage; Factory flooring, hardstanding and base courses; General RCC, masonry and plastering work.

Naidupeta (நாயுடுபேட்டை) · Andhra Pradesh · Tirupati District · PIN 524126 · landmarks: NH-16 (Chennai–Kolkata highway), the industrial belt near Sri City, and highway junctions around the town.

Map

From our crusher to Naidupeta

Map: Naidupeta and our crusher at Perindesam

2 places on this map

Map data © OpenStreetMap contributors; tiles © OpenFreeMap and OpenMapTiles.

6mm Jalli specification

Fraction3.5–8 mm (trade '6mm chips'); tested as IS 383 10 mm single-size
StandardIS 383:2016 Table 7 (10 mm single-size) / MoRTH 510 chips
Also called6mm chips, baby chips, chips jalli, 6mm jalli · Tamil: 6 எம்எம் ஜல்லி
1 unit (100 cft, 2.83 m³)about 4.25 t at 1.5 t/m³, loose
Sold byWeighbridge tonne, 18 MT per 10-wheeler tipper

Blue Metal 6mm: full specification, uses and checks

How to order 6mm Jalli in Naidupeta

  1. Send the quantity (tonnes, units or loads), the site location in Naidupeta and the date: call +91 90039 03003, WhatsApp +91 90039 03003 or use the quote form.
  2. We confirm the delivered price for about 50 km and book a tipper slot (1.5 h run from the crusher).
  3. The tipper is weighed on a weighbridge and leaves with the GST invoice, weighbridge slip and AP e-transit pass.
  4. At the site, check the papers and the material before it is tipped. Minimum order: 1 load (~18 T).
Questions buyers ask

6mm Jalli in Naidupeta: questions

What is the price of 1 unit of 6mm Jalli in Naidupeta?

About ₹1,964 delivered, with 5% GST and before royalty. We count 1 unit (100 cft) of Blue Metal 6mm as 4.25 tonnes at a loose 1.5 t/m³, and the delivered rate to Naidupeta is about ₹462 a ton; that is ₹20 a cft.

How much does 1 tonne of blue metal cost?

6mm Jalli delivered to Naidupeta is about ₹462 a tonne with 5% GST: ₹230 ex-works plus about ₹210 transport for 50 km. Royalty is extra, at actuals.

Who supplies 6mm Jalli in Naidupeta?

M&B Chetty India delivers 6mm jalli chips to Naidupeta in 16–20 MT tipper loads from our Perindesam crusher and partner crushers in the belt; our crusher at Perindesam is about 50 km away (1.5 h by truck). Call +91 90039 03003 or WhatsApp +91 90039 03003 with the quantity and the site location.

How soon can a load reach Naidupeta?

Book 24 to 48 hours ahead: loads are dispatched within two working days of confirmation, and the run from the crusher to Naidupeta takes about 1.5 hours.

Need 6mm Jalli delivered to Naidupeta?

Send the material, quantity and site location. Our sales desk in Gummidipundi calls you back within 15 minutes during desk hours to work out a delivered quote and a dispatch slot.

WhatsApp