Serving Chennai · Ponneri · Gummidipoondi · Tiruvallur · Avadi & the AP–TN border belt +91 90039 03003 WhatsApp Mon–Sat, 9:30 AM – 6:30 PM
OMR / ECR · Chennai, Tamil Nadu · from our crusher

20mm Jalli Price in Thiruvanmiyur

20mm Jalli costs about ₹1,097 a ton delivered in Thiruvanmiyur: ₹4,828 a unit (100 cft) or ₹48 a cft at 1.55 t/m³, with 5% GST. That is ₹475 ex-works plus ~₹570 transport for 110 km, and a full 18 MT load is about ₹19,751, royalty extra. Call or WhatsApp to book; the run takes about 3.5–4 hours.

₹1,097 / ton delivered, incl. 5% GST ~110 km from our crusher · 3.5–4 h by truck 1 load (~18 T) minimum order
WhatsApp
Crushed dark grey stone aggregate of the 20 mm blue metal type, close-up — stock photo
20mm Jalli (Mukkal Jalli) · Thiruvanmiyur
Delivered price

20mm Jalli price by quantity in Thiruvanmiyur

Delivered price finder

20mm Jalli delivered to Thiruvanmiyur

Pick how you buy it (per ton, per unit of 100 cft, per cft or per load) and how much: the delivered price and its breakdown change at once. Every figure is also in the full table below.

Common orders:
  • Delivered = ex-works rate + transport for ~110 km + 5% GST; royalty at actuals.
  • 1 unit = 100 cft ≈ 4.4 t of Blue Metal 20mm at a loose 1.55 t/m³.

Blue Metal 20mm delivered to Thiruvanmiyur

1 × ton

Quantity≈ 1 t
Material (ex-works)₹475
Transport, ~110 km₹570
GST 5%₹52
Delivered price
₹1,097
per ton delivered, incl. 5% GST
WhatsApp

Royalty and levies extra, at actuals. 1 unit (100 cft) ≈ 4.4 t; a tipper load is 18 MT.

See all prices and quantitiesPer ton, per unit (100 cft), per cft and per load: delivered first, then ex-works and transport
20mm Jalli delivered to Thiruvanmiyur, by quantity
QuantityDelivered price (incl. 5% GST)Ex-worksof which transport (before GST)
1 ton (MT)₹1,097₹475~₹570
1 unit (100 cft ≈ 4.4 t)₹4,828₹2,090~₹2,508
1 cft (≈ 44 kg)₹48₹21~₹25
One 18 MT tipper load₹19,751₹8,550~₹10,260
Two loads (36 MT)₹39,501₹17,100~₹20,520

Unit and cft figures use our loose bulk density for Blue Metal 20mm: 1.55 t/m³, so 1 unit (100 cft, 2.83 m³) ≈ 4.4 t. Royalty and levies are itemised at actuals. Rates reviewed 2 October 2026.

Next question: how many loads do I need? Use the concrete quantity calculator, then price your exact quantity in the delivered-cost estimator.

20mm Jalli suppliers in Thiruvanmiyur

M&B Chetty India supplies 20mm jalli in Thiruvanmiyur from our Perindesam crusher and partner crushers in the belt. Our crusher at Perindesam (K.V.B. Puram mandal, Tirupati district) is about 110 km by road and 3.5–4 hours away for a loaded tipper. Every load is weighed on a weighbridge and travels with the GST invoice, weighbridge slip and AP e-transit pass (plus an e-way bill above ₹50,000).

Heavy vehicles face daytime entry restrictions inside Chennai city; delivery is scheduled within permitted hours.

Who orders it in Thiruvanmiyur: Builders (20mm, 12mm, M-Sand, P-Sand); House owners (20mm, M-Sand, P-Sand).

About Thiruvanmiyur

Thiruvanmiyur is where the East Coast Road (ECR) begins, with the Marundeeswarar Temple, a large bus terminus and an MRTS station. It is a dense residential area between the beach and the Taramani offices, so work is apartment buildings, house rebuilds and commercial blocks.

Building work in Thiruvanmiyur: Apartment buildings and house rebuilds; Commercial blocks near the bus terminus.

Thiruvanmiyur (திருவான்மியூர்) · OMR / ECR · Chennai district · PIN 600041 · landmarks: Marundeeswarar Temple, Thiruvanmiyur bus terminus, Thiruvanmiyur MRTS station

Map

From our crusher to Thiruvanmiyur

Map: Thiruvanmiyur and our crusher at Perindesam

2 places on this map

Map data © OpenStreetMap contributors; tiles © OpenFreeMap and OpenMapTiles.

20mm Jalli specification

Nominal size20 mm graded (16–24 mm fraction)
StandardIS 383:2016 Table 7 (20 mm graded)
Also called20mm jalli, mukkal jalli, 3/4 jalli, 20mm aggregate · Tamil: முக்கால் ஜல்லி
1 unit (100 cft, 2.83 m³)about 4.4 t at 1.55 t/m³, loose
Sold byWeighbridge tonne, 18 MT per 10-wheeler tipper

Blue Metal 20mm: full specification, uses and checks

How to order 20mm Jalli in Thiruvanmiyur

  1. Send the quantity (tonnes, units or loads), the site location in Thiruvanmiyur and the date: call +91 90039 03003, WhatsApp +91 90039 03003 or use the quote form.
  2. We confirm the delivered price for about 110 km and book a tipper slot (3.5–4 h run from the crusher).
  3. The tipper is weighed on a weighbridge and leaves with the GST invoice, weighbridge slip and AP e-transit pass (plus an e-way bill above ₹50,000).
  4. At the site, check the papers and the material before it is tipped. Minimum order: 1 load (~18 T).
Questions buyers ask

20mm Jalli in Thiruvanmiyur: questions

What is the price of 1 unit of 20mm Jalli in Thiruvanmiyur?

About ₹4,828 delivered, with 5% GST and before royalty. We count 1 unit (100 cft) of Blue Metal 20mm as 4.4 tonnes at a loose 1.55 t/m³, and the delivered rate to Thiruvanmiyur is about ₹1,097 a ton; that is ₹48 a cft.

How much does 20 mm aggregate weigh per m3?

About 1.55 tonnes per m³ loose, which is how we convert our tonne price: 1 unit (100 cft, 2.83 m³) is about 4.4 t. Delivered to Thiruvanmiyur, 20mm jalli is about ₹1,097 a ton with 5% GST.

Who supplies 20mm Jalli in Thiruvanmiyur?

M&B Chetty India delivers 20mm jalli to Thiruvanmiyur in 16–20 MT tipper loads from our Perindesam crusher and partner crushers in the belt; our crusher at Perindesam is about 110 km away (3.5–4 h by truck). Call +91 90039 03003 or WhatsApp +91 90039 03003 with the quantity and the site location.

How much 20mm Jalli for a typical job in Thiruvanmiyur?

Typical estimate: about 35 MT for the slabs, beams and columns of an RCC-framed house of 1,000 sq ft built-up. That is 2 tipper loads, about ₹38,404 delivered to Thiruvanmiyur at today's rate. Your engineer's quantities come first.

How soon can a load reach Thiruvanmiyur?

Book 24 to 48 hours ahead: loads are dispatched within two working days of confirmation, and the run from the crusher to Thiruvanmiyur takes about 3.5–4 hours.

How many loads of jalli and M-Sand for a house in Thiruvanmiyur?

Typical estimate for a framed G+1 house: about 35 MT of 20mm jalli and 38 MT of M-Sand per 1,000 sq ft built-up, plus about 9 MT of P-Sand for plaster — roughly two 18 MT loads each of jalli and M-Sand per 1,000 sq ft. Your engineer's BOQ governs; our 1,500 sq ft house guide shows the working.

Need 20mm Jalli delivered to Thiruvanmiyur?

Send the material, quantity and site location. Our sales desk in Gummidipundi calls you back within 15 minutes during desk hours to work out a delivered quote and a dispatch slot.

WhatsApp